Basic Research| Volume 47, ISSUE 11, P1790-1795, November 2021

An Automated Measurement Method for the Endodontic Working Width of Lower Molars by Means of Parametric Models Using Cone-beam Computed Tomographcy and Micro–Computed Tomography

Published:August 13, 2021DOI:



      A new method for the approximation of the root canal's cross-sectional shape and its working width using cone-beam computed tomographic (CBCT) or micro–computed tomographic (micro-CT) imaging was introduced.


      Scanned data from 29 extracted human mandibular first and second molar distal root canals without instrumentation were reconstructed and analyzed with a self-developed measurement algorithm. The 3-dimensional volume models were sliced perpendicular to the vertical axis. Using different 2-dimensional parametric models, the contour of each root canal slice was approximated and used to determine the canal's cross-sectional dimensions. The measurements of minor width, major width, and the root canal's conicity were statistically analyzed using analysis of variance.


      The measured minor and major widths of the investigated root canals were significantly higher (probability value P < .05) when evaluated by CBCT images than the results obtained from micro-CT data. Both dimensions increased starting from the apical foramen (P < .01). The narrowest measured canal widths were 0.19–0.24 mm for CBCT imaging and 0.09–0.21 mm for micro-CT imaging in the apical part. The maximum values for conicity were between 13% and 17% in the cervical third.


      The 3-dimensional imaging data from CBCT and micro-CT imaging enabled a valuable anatomic assessment of the root canal's cross-sectional working width along the canal up to the physiological foramen in order to determine an adequate apical diameter as well as the correct measured taper in the cervical and medial part.

      Key Words

      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'


      Subscribe to Journal of Endodontics
      Already a print subscriber? Claim online access
      Already an online subscriber? Sign in
      Institutional Access: Sign in to ScienceDirect


        • Rivera E.M.
        • Walton R.E.
        Longitudinal tooth cracks and fractures: an update and review.
        Endod Topics. 2015; 33: 14-42
        • Missau T.
        • De Carlo Bello M.
        • Michelon C.
        • et al.
        Influence of endodontic treatment and retreatment on the fatigue failure load, numbers of cycles for failure, and survival rates of human canine teeth.
        J Endod. 2017; 43: 2081-2087
        • Plotino G.
        Minimally Invasive Approaches in Endodontic Practice.
        Springer International Publishing, Cham, Switzerland2021
        • Weiger R.
        • Bartha T.
        • Kalwitzki M.
        • et al.
        A clinical method to determine the optimal apical preparation size. Part I.
        Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2006; 102: 686-691
        • Clark D.
        • Khademi J.
        Modern molar endodontic access and directed dentin conservation.
        Dent Clin North Am. 2010; 54: 249-273
        • Leseberg D.A.
        • Montgomery S.
        The effects of Canal Master, Flex-R, and K-Flex instrumentation on root canal configuration.
        J Endod. 1991; 17: 59-65
        • Peters O.A.
        • Peters C.I.
        • Schönenberger K.
        • et al.
        ProTaper rotary root canal preparation: effects of canal anatomy on final shape analysed by micro CT.
        Int Endod J. 2003; 36: 86-92
        • Wu M.K.
        • R'oris A.
        • Barkis D.
        • et al.
        Prevalence and extent of long oval canals in the apical third.
        Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2000; 89: 739-743
        • Dong J.
        • Hong S.Y.
        • Hasselgren G.
        Theories and algorithms for 3-D root canal model construction.
        Comput Aided Des. 2005; 37: 1177-1189
        • Vertucci F.J.
        Root canal morphology and its relationship to endodontic procedures.
        Endod Topics. 2005; 10: 3-29
        • Peters O.A.
        • Laib A.
        • Rüegsegger P.
        • et al.
        Three-dimensional analysis of root canal geometry by high-resolution computed tomography.
        J Dent Res. 2000; 79: 1405-1409
        • Dannemann M.
        • Kucher M.
        • Kirsch J.
        • et al.
        An approach for a mathematical description of human root canals by means of elementary parameters.
        J Endod. 2017; 43: 536-543
        • Olejnik S.
        • Algina J.
        Generalized eta and omega squared statistics: measures of effect size for some common research designs.
        Psychol Methods. 2003; 8: 434-447
        • Zarei M.
        • Javidi M.
        • Afkhami F.
        • et al.
        Influence of root canal tapering on smear layer removal.
        N Y State Dent J. 2016; 82: 35-38
        • Plotino G.
        • Özyürek T.
        • Grande N.M.
        • et al.
        Influence of size and taper of basic root canal preparation on root canal cleanliness: a scanning electron microscopy study.
        Int Endod J. 2019; 52: 343-351
        • Krikeli E.
        • Mikrogeorgis G.
        • Lyroudia K.
        In vitro comparative study of the influence of instrument taper on the fracture resistance of endodontically treated teeth: an integrative approach-based analysis.
        J Endod. 2018; 44: 1407-1411
        • Bansode P.V.
        • Wavdhane M.B.
        • Pathak S.D.
        • et al.
        Working width: the forgotten dimension.
        IJARIIT. 2018; 4: 175-178
        • Simon J.H.
        The apex: how critical is it?.
        Gen Dent. 1994; 42: 330-334
        • Campello A.F.
        • Marceliano-Alves M.F.
        • Siqueira J.F.
        • et al.
        Determination of the initial apical canal diameter by the first file to bind or cone-beam computed tomographic measurements using micro-computed tomography as the gold standard: an ex vivo study in human cadavers.
        J Endod. 2019; 45: 619-622
        • Jou Y.-T.
        • Karabucak B.
        • Levin J.
        • et al.
        Endodontic working width: current concepts and techniques.
        Dent Clin North Am. 2004; 48: 323-335
        • Cheung G.S.P.
        • Yang J.
        • Fan B.
        Morphometric study of the apical anatomy of C-shaped root canal systems in mandibular second molars.
        Int Endod J. 2007; 40: 239-246